Lamp, UNDERHOOD: Installation: Lamp
WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Position the underhood lamp and bracket (3) to the inner hood (1) reinforcement as a unit. Be certain that the locating tab (5) on the bracket is engaged into the locating hole in the inner hood reinforcement.
- Install a new blind rivet to secure the underhood lamp mounting bracket to the inner hood reinforcement.
- Reinstall the bulb into the underhood lamp. Refer to LAMP, UNDERHOOD, INSTALLATION .
- Reconnect the underhood jumper wire harness connector (2) to the underhood lamp connector receptacle.
- Reinstall the removed push-in retainers that secure the hood silencer pad to the inner hood reinforcement.
- Reconnect the battery negative cable.