LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 ((Heating & Air Conditioning (ATC) - Electrical Diagnostics - 1500, 2500 & 3500)) >> Diagnosis and Testing >> B1035-Infrared Temperature Sensor Circuit High >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Infrared Temperature Sensor pulse with modulated (PWM) signal to the A/C Heater Control is greater than 95% for a continuous period of 60 seconds or more. If the A/C Heater Control detects a valid PWM signal, the DTC will change from active to stored and will stay stored for 100 ignition cycles.

scientia non olet · About LEMON Manuals