LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 404 (Occupant Restraint Controller (Orc) - DTCS B212C-13 To U1415-00 - 2500HD & 3500HD) >> Diagnosis And Testing >> B2255-Occupant Restraint Controller Roll Over Feature Disable >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLED 
    1. Turn the ignition on.
    2. With the scan tool read the ORC Roll Over Feature status Enabled or Disabled.

      Does the scan tool show Roll Over Feature Disabled?

      Repair 

      • With the scan tool select Enable to clear the active B2255 DTC.
      • Perform the RESTRAINTS SYSTEM VERIFICATION TEST. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals