LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 404 (Occupant Restraint Controller (Orc) - DTCS B212C-13 To U1415-00 - 2500HD & 3500HD) >> Diagnosis And Testing >> B212D-13-Ignition-Run-Only-Input-Circuit >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

This DTC sets when the ORC fails to detect ignition voltage or if there is less than 6 volts on the ignition voltage supply circuit for more than 15 seconds while the battery circuit maintains system operating voltage. In the event the ORC detects voltage has returned to normal operating range for a minimum of five seconds, this DTC will immediately transition to stored status.