LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 352 (Lamps/Lighting - Exterior (Service Information) 2500 Hd & 3500 Hd) >> Standard Procedure >> Standard Procedure - Front Lamp Aiming >> Fog Lamp Alignment

Fog Lamp Alignment

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

A properly aimed front fog lamp will project a pattern on the alignment screen 10 centimeters (4 inches) below the fog lamp centerline and straight ahead of the lamp.

Fig 1: Thumbwheel Screw
GC0087640Courtesy of CHRYSLER GROUP, LLC
  1. Turn the fog lamps ON.
  2. Rotate the thumbwheel screw (1) located behind the bumper on the back of each fog lamp unit to adjust the beam height as required.