Set Condition
WARNING: This page is about a different car, the 2019 RAM 3500 HD and 2019 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Condition One:
- Voltage of output signal is less than or equal to a calibrated threshold during PWM duty or no duty phase.
- Condition Two:
- Voltage of output signal is less than or equal to a calibrated threshold during PWM duty phase.
- Voltage of output signal is greater than a calibrated threshold during PWM no duty phase.
- Voltage of output signal is less than a calibrated threshold during PWM no duty phase.