LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 1906 (6.4L - DTCS U0151 To U1449 - 2500HD & 3500HD) >> DTC Troubleshooting >> U017E-Lost Communication With SEATBELT Sensor 1

U017E-Lost Communication With SEATBELT Sensor 1

WARNING: This page is about a different car, the 2019 RAM 3500 HD and 2019 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

This DTC indicates a communication issue has occurred between the Sending  control module (Drivers Door Module - DDM) and the Reporting  control module(s) that set this fault.

NOTE:

Treat this DTC as a MISSING MESSAGE  DTC when performing the COMMUNICATION DIAGNOSTIC PROCEDURE.

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST  be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .

scientia non olet · About LEMON Manuals