LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 1866 (Occupant Restraint Controller (Orc) - DTCS B0001-11 To B0095-87 - 2500HD & 3500HD) >> DTC Troubleshooting >> B0052-11-Passenger SEATBELT Sensor-Circuit Short To Ground >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2019 RAM 3500 HD and 2019 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The ORC monitors the status of the seat belt switch circuits at power up and every 60 ms thereafter while the ignition is in on.

This DTC sets when the ORC detects the seat belt switch circuits have become shorted to ground for more than 2.5 seconds. This DTC transitions from active to stored when the module sees a recovery from the shorted to ground condition for greater than five seconds.

scientia non olet · About LEMON Manuals