Set Condition

WARNING: This page is about a different car, the 2019 RAM 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The turbine speed based calculated output speed deceleration rate is greater than a calibrated threshold under one or more of the following conditions:
- The turbine speed based calculated output speed is greater than 807 RPM and the deceleration rate is greater than 606 RPM in less than ten milliseconds.
- The turbine speed based calculated output speed is greater than 2017 RPM and the deceleration rate is greater than 404 RPM in less than ten milliseconds.
- The turbine speed based calculated output speed is greater than 3227 RPM and the deceleration rate is greater than 282 RPM in less than ten milliseconds.