Set Condition:
WARNING: This page is about a different car, the 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
OPEN CIRCUIT: If pump motor feedback remains greater than 0.75 of a volt for more than 50 msec (+/- 5 msec) after monitoring conditions are met, the DTC will set.
LOCKED MOTOR: If the module detects that the motor is spinning at less than 500 RPM. after monitoring conditions are met, the DTC will set.
LOW VOLTAGE: The voltage of the supply is monitored every 3 msec. If the voltage is low for 150 msec, the DTC will set.