LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 ((Heating & Air Conditioning (ATC) - Electrical Diagnostics - 1500, 2500 & 3500)) >> DTC Troubleshooting >> B1032-Evaporator Temperature Sensor Circuit High >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Evaporator Temperature Sensor voltage input to the A/C Heater Control is above 4.9 volts for a continuous period of 60 seconds. If the A/C Heater Control detects a valid voltage, the DTC will change from Active to Stored and will stay in the controllers memory for 100 ignition cycles.