LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 1823 (Lamps/Lighting - Exterior (Service Information) - 2500HD & 3500HD) >> Standard Procedure >> Standard Procedure - Front Lamp Aiming >> Vehicle Preparation For Lamp Alignment

Vehicle Preparation For Lamp Alignment

WARNING: This page is about a different car, the 2019 RAM 3500 HD and 2019 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for and correct any burnt out bulbs.
  2. Repair or replace any ineffective, worn or damaged body or suspension components that could hinder proper lamp alignment.
  3. Verify proper tire inflation pressures.
  4. Remove any accumulations of mud, snow or ice from the vehicle underbody and clean the front lamp lenses.
  5. Verify that there is no load in the vehicle (cargo or passengers), except for the driver.
  6. The fuel tank should be FULL. Add 2.94 kilograms (6.5 pounds) of weight over the fuel tank for each estimated gallon of missing fuel.
  7. Verify correct vehicle suspension height.
scientia non olet · About LEMON Manuals