Signature Lighting
WARNING: This page is about a different car, the 2019 RAM 3500 HD and 2019 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
SIGNATURE LIGHTING
| Refer to FEATURES INDEX . |
The BCM uses an internal parameter to determine if the vehicle is equipped with the signature lighting feature. Signature lighting will only functions when the following conditions are met:
- Ignition is in the RUN or START state
- Remote start is NOT ACTIVE
- Snow plow is NOT EQUIPPED
If the headlamp is in the OFF position, or if the headlamp switch is in the AUTO position and the headlamps are OFF, the BCM will activate the signature lamp outputs. If the headlamp switch transitions to the park or low beam position, the BCM then disables the signature lamps output.