LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Heating & Air Conditioning (ATC) - Electrical Diagnostics - 3500 Cab & Chassis, 4500 & 5500) >> DTC Troubleshooting >> B1035-Infrared Temperature Sensor Circuit High >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Infrared Temperature Sensor pulse with modulated (PWM) signal to the A/C Heater Control is greater than 95% for a continuous period of 60 seconds or more. If the A/C Heater Control detects a valid PWM signal, the DTC will change from active to stored and will stay stored for 100 ignition cycles.

scientia non olet · About LEMON Manuals