Diagnostic Test

WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE

NOTE:

Make sure the battery voltage is between 10 and 16 volts before proceeding.

Turn the ignition on.
With the scan tool, read the active DTCs.
Does the scan tool display: C10CC-00-ESC SENSOR INTERNAL ELECTRONIC FAILURE?

Yes

NOTE:
For the C10CC-00-ESC Sensor Internal Electronic Failure, use the C006A-54-Multi-Axis Acceleration Sensor-Missing Calibration.
- Perform the C006A-54-Multi-AXIS ACCERELERATION SENSOR-MISSING CALIBRATION procedure Refer to DIAGNOSTIC TEST .
No
- Perform the RESTRAINTS SYSTEM INTERMITTENT TEST Refer to RESTRAINTS SYSTEM INTERMITTENT TEST .