Set Condition
WARNING: This page is about a different car, the 2016 RAM 3500 HD and 2016 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The Occupant Restraint Controller (ORC) monitors the resistance of the Driver Seat Belt Retractor Tensioner C1 circuits. The ORC will set this DTC if it detects high resistance on the Driver Seat Belt Retractor Tensioner C1 circuits for 2.6 seconds. The DTC will change from active to stored when the ORC monitoring shows the open circuit fault is gone for 2.6 seconds.