When Monitored

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

The gear disengagement action has completed and the target gear is the 1st gear or the 3rd gear.
The Gear Shift Position Sensor 1st-3rd has no electrical failure.
TCM driver for the even clutch electrovalve (PPV-K2) and the 2nd-3rd-R gear-engaging electrovalve (PPV1) has not failed.
The SPI communication hardware diagnostic has not failed.
TCM driver for the odd clutch electrovalve (K1) and the 1st-4th-5th-6th gear-engaging electrovalve (PPV2) has not failed.
The Hydraulic Pressure Low Diagnostic has not failed.