When Monitored

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

Ignition key is ON or the TCM control unit is in power-on state.
The engine is not in cranking mode.
Power supply is between 7 - 24 volts.
Main Micro Processor (MMP) supply diagnostics have not failed.
Sensor Power Supply 3 (VS3) to the Hydraulic Pressure Sensor has not failed.
Internal Control Module A/D Diagnostic has not failed.