When Monitored

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

The gate select is not in self learning mode AND no recovery actions involving the gate Select are active.
The gate select position sensor has no electrical or out of range faults.
The integrated circuit named MGS3 which drives the gate select electrovalve (PPV-S) has not failed.
The communication between the integrated circuit named MGS3 and the Main Micro Processor (MMP) has not failed.
The hydraulic pressure value low diagnostic has not failed.