When Monitored

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

Ignition is in ACCY mode or the Transmission Control Module (TCM) is in power-on state.
The engine is not in cranking mode.
Power supply is between 7 - 24 volts
Main Micro Processor (MMP) supply diagnostics have not failed.
The Sensor Power Supply 3 (VS3) to the Park Position Sensor has no electrical failure.