LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (6.7L Diesel - DTCS - P21C4 To U1601 - 3500 Cab & Chassis) >> Diagnosis and Testing >> P229F-AFTERTREATMENT NOx SENSOR CIRCUIT PERFORMANCE - BANK 1 SENSOR 2 >> Code Description >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module detects that the NOx Sensor 1/2 reading is not reading zero during decel condition and zero fueling for two consecutive trips or the PCM has detected that the NOx Sensor 1/2 reading is not changing with engine conditions for two consecutive trips.