Diagnostic Test

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

VISUAL INSPECTION
1. Turn ignition off.
2. Perform a visual inspection of the Inlet hose for debris, such as snow packing or dirt loading blocking the passage.
  Was a restriction found?
  
  Yes
  - Clean the debris from the passage way. Check and replace the Air Filter if necessary.
  - Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .
  No
  - Replace the Air Filter.
  - Perform the POWERTRAIN VERIFICATION TEST - 6.7L. Refer to POWERTRAIN VERIFICATION TEST - 6.7L .