LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (5.7L Engine (Service Information)) >> Lubrication >> COOLER and LINES, Oil >> Removal >> Removal

COOLER and LINES, Oil: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise vehicle on hoist.
  2. Drain cooling system. Refer to Standard Procedure .
  3. Disconnect oil cooler coolant hoses.
  4. Remove oil filter.
  5. Remove oil cooler connector bolt.
  6. Remove oil cooler.