LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 Base, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (5.7L Engine (Service Information)) >> Engine Block >> FLEXPLATE >> Removal >> Removal

Engine Block: FLEXPLATE: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Flexplate Retaining Bolt Removal & Tightening Sequence
GC0088080Courtesy of CHRYSLER LLC
  1. Remove the transmission. Refer to Removal .
  2. Using the sequence shown in illustration, remove the flexplate retaining bolts.
  3. Remove the flexplate.