LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Transmission Control System Relay >> Description and Operation >> Transmission Control Relay - Operation

Transmission Control Relay - Operation






OPERATION

This vehicle is not equipped with a transmission relay. The transmission control is done through the TIPM. The TIPM receives an input signal from the PCM. Once the TIPM receives the signal, it will output a 12 volt supply to the transmission.

scientia non olet · About LEMON Manuals