LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pump >> Oil Pressure Regulator Valve >> Service and Repair >> Oil Pressure Relief Valve - Installation

Oil Pressure Relief Valve - Installation






INSTALLATION










1. Lubricate relief valve with oil.

CAUTION: The pressure relief valve must be installed as shown or engine damage may occur.

2. Install relief valve (1) , spring and retainer cap. Tighten cap to 12 Nm (105 in. lbs.).
3. Install the oil pan. Engine Oil Pan - Installation

scientia non olet · About LEMON Manuals