LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt >> Service and Repair >> Removal and Replacement >> Serpentine Accessory Drive Belt - Removal >> Power Steering Belt

Power Steering Belt






REMOVAL










1. Raise and support vehicle.
2. Remove right front inner wheel splash shield.
3. Use a socket and ratchet to rotate the crankshaft clockwise.
4. While rotating the crankshaft clockwise, walk the power steering drive belt (2) off of the power steering pulley (1).
5. Remove the power steering drive belt (2).

scientia non olet · About LEMON Manuals