LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve >> Service and Repair >> Removal and Replacement >> Intake and Exhaust Valves - Removal

Intake and Exhaust Valves - Removal






REMOVAL










1. Remove cylinder head(s). Cylinder Head - Removal
2. Remove valve spring. Valve Springs - Removal
3. Before removing valves, remove any burrs from valve stem lock grooves to prevent damage to the valve guides.
4. Remove valve (7). Identify each valve to ensure installation in original location.

scientia non olet · About LEMON Manuals