LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair >> Hydraulic Lifter - Installation

Hydraulic Lifter - Installation






INSTALLATION










1. Install hydraulic lash adjuster making sure adjusters are at least partially full of oil. This can be verified by little or no plunger travel when lash adjuster is depressed.
2. Install the rocker arm(s) Valve Rocker Arm - Installation.
3. Install the cylinder head covers Cylinder Head Cover(s) - Installation.

scientia non olet · About LEMON Manuals