Electronic Stability Program (ESP) Switch - Removal

REMOVAL

NOTE: The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol.

NOTE: The ESC Off switch is integral to the accessory switch bank and cannot be serviced separately.

1. Disconnect and isolate the negative battery cable.
2. Remove the center bezel from the instrument panel and place it on a work bench Instrument Panel Bezel - Removal.
3. Remove the screws that secure the accessory switch bank to the back of the center bezel and remove the accessory switch bank.