LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Service and Repair >> Removal and Replacement >> Retractable Hard Top Unique Components >> Cover - Installation

Cover - Installation





INSTALLATION





1. Place the hinge cover (1) into position on the side rail.
2. Engage the front retainers (5) to the side rail by squeezing together.
3. Route the strap (3) as shown and secure it with the rear retainer (2) to the side rail.
4. Install the front and mid/rear headliners. Convertible Top Headliner - Installation.
scientia non olet · About LEMON Manuals