LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Service and Repair >> Removal and Replacement >> Folding Top - Installation >> Retractable Hard Top - Front Panel

Retractable Hard Top - Front Panel





FRONT PANEL





1. If replacing, transfer all parts to the new top panel.
2. With help from an assistant, carefully place the front panel into position on the vehicle.
3. Install the rearward mounting fastener (4) on each side.
4. Install the forward mounting fastener (3) on each side.
5. Connect the cable (2) to the top panel linkage.
6. Engage the cable retainer (1) to the top panel.
7. Place the top in the vertical position.
8. Install the hinge covers.
9. Install the front headliner. Convertible Top Headliner - Installation.
10. Install the center rail trim panels. Header Trim - Installation.
11. Cycle the top and verify operation.

scientia non olet · About LEMON Manuals