LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Service and Repair >> Removal and Replacement >> CST And RHT Common Components >> Plate - Installation

Plate - Installation





INSTALLATION

GUIDE PLATE





1. Position the primary hinge guide plate (1).
2. Install and secure the guide plate fasteners.
3. Install the primary hinge assembly (4), Convertible Soft Top for convertible soft top, or Retractable Hard Top for retractable hard top.

SLIDING "Z" REINFORCEMENT PLATE

1. Position the sliding "Z" reinforcement plate (3) on the underside of the primary hinge.
2. Install and secure the reinforcement plate fasteners.
3. Install the primary hinge assembly, Convertible Soft Top for convertible soft top, or Retractable Hard Top for retractable hard top.
scientia non olet · About LEMON Manuals