LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Service and Repair >> Removal and Replacement >> CST And RHT Common Components >> Front Panel Bumper - Installation

Front Panel Bumper - Installation





INSTALLATION





1. Place the bumper (2) to the convertible top side rail.
2. Install the retaining pin (1) that secures the bumper.
3. Install the hinge covers, RHT only.
4. Install the headliner(s). Convertible Top Headliner - Installation.

scientia non olet · About LEMON Manuals