Instrument Cluster (Service Information): Removal: Removal

Fig 1: Instrument Cluster Retaining Screws

Courtesy of CHRYSLER LLC

1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Remove the instrument cluster bezel. Refer to Body/Instrument Panel/BEZEL, Instrument Cluster - Removal .
4. Remove four screws (1) to the instrument cluster (2).
   Fig 2: Locating Cluster Electrical Connectors

   Courtesy of CHRYSLER LLC
5. Pull straight back to expose the cluster electrical connectors.
   Fig 3: Remove/Install Electrical Connectors

   Courtesy of CHRYSLER LLC
6. Disconnect the four cluster electrical connectors and remove cluster from vehicle.