LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shift Linkage >> Service and Repair >> Crossover Lever - Installation

Crossover Lever - Installation






INSTALLATION

1. Install crossover lever to shaft and fasten with NEW roll pin.
2. Install crossover cable to bracket. Fasten with clip.
3. Install crossover cable to crossover lever.
scientia non olet · About LEMON Manuals