Starter - Installation

2.4L










1. Reinstall starter motor into vehicle lower engine compartment.
2. Install starter motor mounting bolts and torque to 54 Nm (40 ft. lbs.).
3. Connect starter motor wiring. Torque solenoid battery cable nut to 10 Nm (90 in. lbs.).





4. Install Engine Structural Collar, Structural Dust Cover - Installation.
5. Lower vehicle from hoist.
6. Reconnect battery negative cable.
7. Reinstall air cleaner box cover, Air Cleaner - Installation.
8. Verify operation of vehicle and systems.
9. Close hood and remove from hoist.