LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Transmission Control System Relay >> Description and Operation >> 40TE Automatic Transaxle

40TE Automatic Transaxle






OPERATION

This vehicle is not equipped with a transmission relay. The transmission control is done through the TIPM. The TIPM receives an input signal from the PCM. Once the TIPM receives the signal, it will output a 12 volt supply to the transmission.

scientia non olet · About LEMON Manuals