Defroster Duct - Removal

REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.





1. Remove the instrument panel assembly from the vehicle and place it on a workbench Instrument Panel - Removal.
2. Disconnect the right demister duct (1) and the left demister duct (3) from the defroster duct (4).
3. Remove the four screws (2) that secure the defroster duct to the instrument panel and remove the duct.