LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Service and Repair >> Air Cleaner Body - Installation

Air Cleaner Body - Installation






INSTALLATION










1. Install inlet duct (3) to the air cleaner housing (2).
2. Make sure the rubber grommets, for the air cleaner housing lower pins, are in place when reinstalling the air cleaner housing (2). The rubber grommets mount to the Totally Integrated Power Modular (TIPM) bracket (4).
3. Push air cleaner housing (2) down while aligning pins into the grommets.
4. Connect the throttle body air inlet hose/clean (1) air hose to the air cleaner housing (2).

scientia non olet · About LEMON Manuals