LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Front Crankshaft Seal >> Service and Repair >> Front Crankshaft Oil Seal - Installation

Front Crankshaft Oil Seal - Installation






INSTALLATION










1. Install new seal by using Front Crankshaft Seal Installer 6780 (3).
2. Place seal (2) into opening with seal spring towards the inside of engine. Install seal until flush with cover.










3. Install crankshaft sprocket using Crankshaft Damper/Sprocket Installer 6792 (1).
4. Install timing beltTiming Belt & Sprockets - Installation.
5. Install crankshaft vibration damperVibration Damper - Installation.

scientia non olet · About LEMON Manuals