LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Sedan L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Front Crankshaft Seal >> Service and Repair >> Front Crankshaft Oil Seal - Removal

Front Crankshaft Oil Seal - Removal






REMOVAL





1. Remove accessory drive belt.
2. Install damper holder 9707 (1) and remove damper retaining bolt.
3. Pull damper off crankshaft.





4. Remove front crankshaft oil seal (1) by prying out with a screw driver (2). Be careful not to damage the cover seal surface.

scientia non olet · About LEMON Manuals