LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Shift Solenoid >> Service and Repair >> Transmission Solenoid and Pressure Switch Assembly - Removal

Transmission Solenoid and Pressure Switch Assembly - Removal






REMOVAL

1. Remove valve body Valve Body - Removal.




2. Remove the clamp plate bolts and clamp plate.





3. Remove the electrical connectors to the pressure control solenoid and line pressure sensors.
4. Remove the solenoid/pressure switch assembly.

scientia non olet · About LEMON Manuals