Power Steering Cooler - Removal

REMOVAL

NOTE: Before proceeding, Service Precautions .

1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise and support the vehicle. Maintenance.
3. If equipped, remove the belly pan below the engine.
4. Remove the lower fascia valance.




5. Remove the hose clamps (5) attaching the fluid return hoses (1) to the power steering fluid cooler line (3). Separate the return hoses from the cooler line.
6. Remove the two cooler mounting push pins (4) at the bumper reinforcement (2).
7. Remove the cooler line (3) from the vehicle.