LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Lighting and Horns >> Fog/Driving Lamp >> Service and Repair >> Fog Lamp - Removal

Fog Lamp - Removal






LAMP UNIT





1. Disconnect and isolate the battery negative cable.
2. Loosen or remove the front lower fascia closeout enough to gain access to the fog lamp Front Lower Fascia Closeout - Removal.
3. Remove the two screws (1) attaching fog lamp (2) to front bumper fascia.
4. Remove fog lamp (2) from fascia.
5. Disconnect wire connector (3) from fog lamp bulb.
6. Remove fog lamp (2) from vehicle.