LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Exhaust System >> Exhaust Manifold >> Service and Repair >> Removal and Replacement >> Exhaust Manifold - Removal >> Front Exhaust Manifold

Front Exhaust Manifold






REMOVAL





1. Disconnect and isolate the negative battery cable.










2. Remove the three fasteners, and remove the upper heat shield.





3. Remove the 12 belly pan fasteners (1) and remove the belly pan (2).

4. Remove the front cross under pipe bolts.
5. Disconnect and remove the front lower maniverter oxygen sensor.
6. Loosen the oil level indicator tube retaining bolt and position the dipstick out of the way.





7. Disconnect and remove the front upper maniverter oxygen sensor.
8. Remove the maniverter retaining bolts and maniverter.

scientia non olet · About LEMON Manuals