LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Belt Tensioner >> Service and Repair >> Engine Timing Tensioner - Installation >> Tensioner Pulley Assembly

Tensioner Pulley Assembly






TENSIONER PULLEY ASSEMBLY





1. Position the timing belt bracket (3) and tensioner pulley (1) onto the pump housing and install the pivot bolt (2). Tighten the pivot bolt to 61 Nm (45 ft. lbs.).
2. Install the timing belt Timing Belt & Sprockets - Installation.

scientia non olet · About LEMON Manuals