LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount Insulator - Removal >> Right

Right






REMOVAL





1. Remove Power Steering Fluid Reservoir and set aside. Reservoir, Power Steering Pump - Removal.
2. Disconnect the ground strap
3. Support the engine with a block of wood and a suitable jack.
4. Remove 3 engine mount bracket bolts (1).
5. Remove 2 engine mount bracket nuts (2)
6. Remove engine mount bracket. (3).
7. Remove 2 engine mount bolts (5).
8. Remove engine mount (4).