Camshaft - Removal

REMOVAL










NOTE: Camshafts are removed from the rear of each cylinder head.

CAUTION: Care must be taken not to nick or scratch the journals when removing the camshaft.

1. Remove the camshaft sprocket Timing Belt & Sprockets - Removal.
2. Remove the rocker arm shaft assembly Valve Rocker Arm - Disassembly.





3. To remove the right camshaft, remove the EGR Valve assembly.
4. Remove the camshaft thrust plate (1) or (2).
5. Carefully remove the camshaft from the rear of the cylinder head.
6. NOTE: It may be necessary to remove the Powertrain Control Module (PCM) in order to remove the camshaft from the right cylinder head.