LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Service and Repair >> Removal and Replacement >> Convertible Soft Top Unique Components >> Folding Top Rear Panel - Installation

Folding Top Rear Panel - Installation






INSTALLATION





1. With the help of assistant, place the rear panel (9) into position and loosely install one fastener (10) to hold it in place.
2. Align the rear panel to the marks on the bracket made during removal.
3. Install the fasteners to the rear panel. Tighten to 20 N-m (15 ft. lbs.).
4. Install the heated glass harness to the rear panel and connect the electrical connectors.
5. Install the folding top cover. Folding Top Cover - Installation.
scientia non olet · About LEMON Manuals